[Home]History of CustomizingConfigsOnUbuntu

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Revision 4 . . April 21, 2006 12:50 pm by Jmkasunich
Revision 3 . . April 11, 2006 1:06 pm by falcon.inebraska.com
  

Difference (from prior major revision) (no other diffs)

Changed: 3,4c3,5
From "Places" choose "Computer", then double-click "Filesystem", "etc", "emc2", "sample-configs".
Right-click "sim" and choose "copy"
From "Places" choose "Computer", then double-click "Filesystem", "etc", "emc2", "sample-configs". You will see a number of sample configurations, with names like "sim", "stepper", "motenc", etc. You can copy any of them to use as the beginning of your customized configuration. You should pick one that is close to what you ultimately need. For instance, if your machine uses stepper motors, you probably should choose the "stepper" configuration. If you are using servos with a Servo-to-Go card, "stg" is for you.

Pick a configuration, right-click it and choose "copy"

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Search:
Published under a Creative Commons License