[Home]History of TweakingSoftwareStepGeneration

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Revision 16 . . (edit) January 22, 2012 1:50 pm by CNCDreamer [rebranded]
Revision 15 . . January 22, 2008 6:19 pm by BigJohnT
Revision 14 . . January 22, 2008 6:17 pm by BigJohnT
  

Difference (from prior major revision) (minor diff, author diff)

Changed: 34,36c34,37
NEW!! Starting with 2.2.2 to run a latency test just open up a terminal
window and type in "latency-test" and follow the bouncing ball. Then run
Stepconf Wizzard... This is getting so easy heck even I can do it, BJT.

NEW!! Starting with 2.2.2



:To run a latency test just open up a terminal
:window and type in "latency-test" and follow the bouncing ball. Then run
:Stepconf Wizzard... This is getting so easy heck even I can do it, BJT.==

Changed: 38c39
DO NOT TRY TO RUN EMC2 WHILE THE TEST IS RUNNING
DO NOT TRY TO RUN LinuxCNC WHILE THE TEST IS RUNNING

Changed: 100c101
EMC, regardless of whether you use software stepping or not.
LinuxCNC, regardless of whether you use software stepping or not.

Changed: 104c105
onboard video. But a $5 used Matrox video card solved the problem - EMC
onboard video. But a $5 used Matrox video card solved the problem - LinuxCNC

Changed: 147c148
BASE_PERIOD is the "heartbeat" of your EMC computer. Every period,
BASE_PERIOD is the "heartbeat" of your LinuxCNC computer. Every period,

Changed: 206c207
start at 25uS or more, run EMC, and see how things respond. If all is
start at 25uS or more, run LinuxCNC, and see how things respond. If all is

Changed: 232c233
But the EMC2 software step generator has some parameters that let
But the LinuxCNC software step generator has some parameters that let

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Search:
Published under a Creative Commons License