[Home]History of Rayhenry

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Revision 15 . . July 7, 2012 8:12 pm by Archivist [fix bad links emcinfo.pl->wiki.pl]
Revision 14 . . May 9, 2008 1:19 pm by Rayhenry
  
Difference (from prior major revision) (no other diffs)

Changed: 30c30
This section lists several setup things that I like to do as soon as I install a new copy of Ubuntu. This is all related to the 6.06 LTS as modified by Chris Radek and packaged into the EMC2-Live cd or iso. If you want to install an RT (real-time) kernel and EMC2 over another distro or over an ordinary Ubuntu see the install page. http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Installing_EMC2
This section lists several setup things that I like to do as soon as I install a new copy of Ubuntu. This is all related to the 6.06 LTS as modified by Chris Radek and packaged into the EMC2-Live cd or iso. If you want to install an RT (real-time) kernel and EMC2 over another distro or over an ordinary Ubuntu see the install page. http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Installing_EMC2

Changed: 48c48
(Don't do this for EMC's configs. Please use the copy facility described here. http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?CustomizingConfigsOnUbuntu or if you have installed EMC2-2.1 the configuration selection widget allows you to make copies of configs and icons to start specific configurations.
(Don't do this for EMC's configs. Please use the copy facility described here. http://wiki.linuxcnc.org/cgi-bin/wiki.pl?CustomizingConfigsOnUbuntu or if you have installed EMC2-2.1 the configuration selection widget allows you to make copies of configs and icons to start specific configurations.
LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Search:
Published under a Creative Commons License