History of Pico Systems PWM Controller

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Difference (from prior major revision) (no other diffs)

Changed: 7,11c7,9

Unfortunately, the BDI CD's of EMC do not support this board.
The best way to set it up right now is to use the BDI-Live! rc46 CD or one of the net mirrors
with the ISO image of that CD to install Linux and EMC on your computer, then update it with this
file : http://jelinux.pico-systems.com/codes/update.tgz
Further instructions for applying this update are at http://jelinux.pico-systems.com/update.html

Early BDI CD's of EMC do not support this board.
The best way to set it up right now is to use the BDI 4.30 CD or one of the net mirrors
with the ISO image of that CD to install Linux and EMC on your computer.

Changed: 15,16c13

and recompile it. This is not for the faint of heart! Otherwise, I can add the files
to your hard drive if you send it to me.

and recompile it. This is not for the faint of heart!

Changed: 120,121c117

a version of gnuplot with X-11 support. If you have used my update.tgz file to
install the EMC updates, this is already taken care of. Otherwise, get gnuplot-4.0.0, you can download this as

a version of gnuplot with X-11 support. Get gnuplot-4.0.0, you can download this as

Published under a Creative Commons License

	Revision 14 . . December 9, 2005 3:31 am by h-69-3-230-106.chcgilgm.covad.net [updated mention of BDI 4.30]
	Revision 13 . . (edit) May 22, 2005 10:24 pm by Jmelson