[Home]History of NetMos

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Revision 9 . . (edit) September 19, 2009 9:19 am by MichaelHaberler
Revision 8 . . January 30, 2009 6:50 pm by Pjm
Revision 7 . . January 30, 2009 6:49 pm by Pjm
  
Difference (from prior major revision) (minor diff, author diff)

Added: 69a70,71
You must make sure that parport_pc is not loaded before you start EMC2 or it will error. The commands above will
unload parport_pc, lp and ppdev.

Added: 71a74,76


The data sheets from Moschip describe the register layout. Try google "9815 site:moschip.com" or whatever your chip type is.
LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Search:
Published under a Creative Commons License