[Home]History of ModIO

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Revision 11 . . July 8, 2012 7:30 am by Archivist [fix bad links emcinfo.pl->wiki.pl]
Revision 10 . . February 8, 2012 6:15 am by Kirk Wallace [Removed "Carriage Return Loop Problem" section, added missing conv_u32_bits.comp and conv_u32_lowbits.domp links.]
Revision 9 . . (edit) March 12, 2011 8:39 pm by Kirk Wallace [*Corrected Makefile names]
  

Difference (from prior major revision) (no other diffs)

Changed: 64c64
:Available from the vfs11_vfd directory in (someone's) GIT here, http://git.mah.priv.at/gitweb/vfs11-vfd.git/tree/master . I used a PC with Ubnuntu 8.04, EMC2 2.4.6, emc-dev installed, and the configuration from EMC2 from source, http://wiki.linuxcnc.org/emcinfo.pl?Installing_EMC2#On_Ubuntu_10_04_or_8_04_from_source . I have no idea if the drivers will compile and install with any other configuration -- time will tell.
:Available from the vfs11_vfd directory in (someone's) GIT here, http://git.mah.priv.at/gitweb/vfs11-vfd.git/tree/master . I used a PC with Ubnuntu 8.04, EMC2 2.4.6, emc-dev installed, and the configuration from EMC2 from source, http://wiki.linuxcnc.org/wiki.pl?Installing_EMC2#On_Ubuntu_10_04_or_8_04_from_source . I have no idea if the drivers will compile and install with any other configuration -- time will tell.

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Search:
Published under a Creative Commons License