[Home]History of MazakPlanning

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Revision 2 . . September 21, 2005 1:14 pm by Rayh
Revision 1 . . September 12, 2005 9:47 pm by Jmkasunich
  

Difference (from prior major revision) (no other diffs)

Changed: 3c3,6

Tach feedback to drives



Contents



<toc>

1. Tach feedback to drives




Changed: 18c21

Spindle orient



2. Spindle orient




Changed: 32c35

Estop Chain



3. Estop Chain




Added: 37a41,44

4. Tool Change




The Mazak M5 uses a tool carousel which is mounted to the left side (facing the machine) of the head. There is an intermediate arm that picks the tool from the carousel and orients it so that a tool change arm can grab it and the tool in the spindle at the same time. This arm pulls both tools down and rotates to exchange them. See details of this at MazakToolChange.

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Search:
Published under a Creative Commons License