[Home]History of IndexOnlyHoming

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Revision 4 . . July 24, 2007 7:59 am by Fenn
Revision 3 . . July 24, 2007 7:38 am by Fenn [minor proofreading and formatting]
Revision 2 . . July 24, 2007 7:17 am by Skullworks
  
Difference (from prior major revision) (author diff)

Changed: 2c2
It is now in head/trunk and will be part of the EMC2 v2.2 release
It is now in head/trunk and will be part of the EMC2 v2.2 release.

Changed: 11,13c11


* Note that when encoder is mounted on a servo which has a belt/gear reduction to the lead screw the actual machine movement might be very small and pre-alignment with witness line may be critical.
* When the encoder is mounted on a servo which has a belt/gear reduction to the lead screw the actual machine movement might be very small. In this case, pre-alignment with witness lines must be done precisely.
LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Search:
Published under a Creative Commons License