[Home]History of BackToolLathe

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Revision 8 . . October 28, 2017 2:59 am by Andyough
Revision 7 . . October 26, 2017 12:18 pm by KimK [Add nowiki tags to LinuxCNC mentions.]
Revision 6 . . July 13, 2017 12:14 pm by Rene-Dev
Revision 5 . . March 20, 2016 12:52 pm by Robh
  

Difference (from prior major revision) (no other diffs)

Changed: 6c6

1. Axis .axisrc File Settings.



2. Axis / Gremlin Preview




Added: 11a12,15
When Lathe was first implemented on LinuxCNC the tool orientations were implemented from a Fanuc diagram. But it was not realised that the
diagram was for a back-toolpost lathe. Unfortunately this means that the LinuxCNC orientations are mirrored relative to Fanuc (and most other
lathes) This is unfortunate but hard to fix without breaking existing configs. As it only requires tool-table changes and has no effect on G-code
it probably isn't a major issue.

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Search:
Published under a Creative Commons License