[Home]History of Adding Camview

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Revision 18 . . (edit) November 3, 2021 7:47 pm by JTrantow [Update distributions to include buster and use apt-key instead of using wget.]
Revision 17 . . (edit) November 3, 2021 7:38 pm by JTrantow [*Correct spelling of "example" in text.]
Revision 16 . . October 26, 2017 11:57 am by KimK [Add nowiki tags to LinuxCNC mentions.]
Revision 15 . . February 7, 2015 3:35 am by C45
  

Difference (from prior major revision) (minor diff, author diff)

Changed: 51c51

Adding camview-emc to Linuxcnc



Adding camview-emc to LinuxCNC




Changed: 55c55
If you are using Linuxcnc packages for Ubuntu (10.04 or 8.04) just add the proper camview repository sources to your sources.list file.
If you are using LinuxCNC packages for Ubuntu (10.04 or 8.04) just add the proper camview repository sources to your sources.list file.

Changed: 59c59
If you are using Linuxcnc packages for Ubuntu (10.04 or 8.04) just add the proper camview repository sources to your sources.list file.
If you are using LinuxCNC packages for Ubuntu (10.04 or 8.04) just add the proper camview repository sources to your sources.list file.

Added: 76a77
buster

Changed: 79c80
For exaple: deb http://psha.org.ru/debian/ lucid contrib
For example: deb http://psha.org.ru/debian/ lucid contrib

Added: 89a91,94

Note: Buster does not include wget, but apt-key can be used instead.

$ sudo apt-key adv --fetch-keys http://psha.org.ru/debian/pubkey.gpg

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Search:
Published under a Creative Commons License