Supported Platforms |
The information on this page has moved to the "real" docs here: http://linuxcnc.org/docs/2.7/html/getting-started/ |
LinuxCNC 2.7 supports the following platforms: || Distribution || Architecture || kernel || apt source line || typical use || || Ubuntu Lucid || i386 || RTAI || deb http://linuxcnc.org/ lucid base 2.7-rtai || machine control || || Ubuntu Lucid || i386 & amd64 || vanilla || deb http://linuxcnc.org/ lucid base 2.7-uspace || simulation || || Ubuntu Precise || i386 || RTAI || deb http://linuxcnc.org/ precise base 2.7-rtai || machine control || || Ubuntu Precise || i386 & amd64 || vanilla || deb http://linuxcnc.org/ precise base 2.7-uspace || simulation || || Debian Wheezy || i386 || RTAI || deb http://linuxcnc.org/ wheezy base 2.7-rtai || machine control || || Debian Wheezy || i386 & amd64 || RT-Preempt || deb http://linuxcnc.org/ wheezy base 2.7-uspace || machine control || || Debian Wheezy || i386 & amd64 || vanilla || deb http://linuxcnc.org/ wheezy base 2.7-uspace || simulation || The RTAI kernels are available in the linuxcnc.org debian archive. The RT-Preempt kernels are available in the debian.org debian archive, as part of Debian Wheezy. INI changes requiredTo be determined... |
See the [Getting LinuxCNC] and [Updating LinuxCNC] sections, specifically. |
See the [Getting LinuxCNC] and [Updating LinuxCNC] sections, specifically.