[Home]Mini Frontend

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Difference (from prior major revision) (no other diffs)

Changed: 1,9c1

Introduction



The mini graphical interface was developed to run Sherline and other small mills.

Screenshot



This screenshot shows the mini interface with the emc in auto mode and a tool tip plot of the g-code file.


http://www.redpoint.org.uk/gallery/emc/mini.png


The large display area on the right side of the screen will show plotter, editor, tool, offsets, and help. The machine operator can toggle between any set of these windows using a right mouse click anwyhere over the display.

moved to Mini

moved to Mini

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
This page is read-only. Follow the BasicSteps to edit pages. | View other revisions
Last edited November 20, 2005 12:58 pm by Fenn (diff)
Search:
Published under a Creative Commons License