See http://article.gmane.org/gmane.linux.distributions.emc.devel/3194 for a map of the building showing the EMC room, plus vendor information from George Bulliss. EMC folks will have 24 hour access to the EMC room, but will need to supply a list of EMC folks, plus probably have one or two people appointed to lock up. |
Dale Grover - all week Tom Easterday - all week |
* Emco F1 mill w/Mesa? boards --Tom Easterday |
The EMC Fest for 2010 will be part of the Digital Machinist CNC Workshop (2010) held in Ann Arbor, MI. The official website seems to be [here] and [here], but please add any updates.
The workshop official days are Tuesday June 22 through Friday June 25, 2010, but some may be planning to arrive earlier or stay later, so check all your options.
See http://article.gmane.org/gmane.linux.distributions.emc.devel/3194 for a map of the building showing the EMC room, plus vendor information from George Bulliss. EMC folks will have 24 hour access to the EMC room, but will need to supply a list of EMC folks, plus probably have one or two people appointed to lock up.
Google directions to some of the places mentioned on the official page are available:
[Holiday Inn Near the University of Michigan]
[Washtenaw Community College and Eastern Michigan University Dorms, about 4 miles]
Kim Kirwan - all week (or more?) - Details not final. Hoping to learn more about developing.
Stephen Wille Padnos - only Tuesday and Wednesday. (well, arriving Monday evening some time)
Steve Stallings - all week
Matt Shaver - all week
Chris Radek - all week
Jeff Epler - all week
Dale Grover - all week
Tom Easterday - all week
add your name here, see instructions and link at bottom of page under BasicSteps