[Home]BeagleBone

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Difference (from prior major revision) (no other diffs)

Changed: 5c5
Work is underway to port LinuxCNC to the BeagleBone platform, using the PRU co-processors for software-based stepgen, and a Xenomai kernel for reasonable real-time latency.
Work is underway to port LinuxCNC to the BeagleBone platform, using the PRU co-processors for software-based stepgen, and a Xenomai kernel for reasonable real-time latency.
The BeagleBone is an ARM development board based on the TI AM3359ZCZ CPU.

http://beagleboard.org/bone

Work is underway to port LinuxCNC to the BeagleBone platform, using the PRU co-processors for software-based stepgen, and a Xenomai kernel for reasonable real-time latency.

Additional information can be found on the following pages:

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
This page is read-only. Follow the BasicSteps to edit pages. | View other revisions
Last edited October 26, 2017 7:48 pm by KimK (diff)
Search:
Published under a Creative Commons License