[Home]Fusion360

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Fusion360

Autodesk Fusion360 is hard to ignore as a capable and polished CAD / CAM system despite being closed source, largely cloud-based and liable to change its subscription model without notice.

The supplied (emc2) postprocessor works reasonably well with LinuxCNC, but does not support a 4th axis and does not properly manage the G59.1 etc coordinate systems.

This modified post does both, but is offered on a best-guess basis with no warranty.

upload:LinuxCNC4Axis.cps


LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
This page is read-only. Follow the BasicSteps to edit pages. | View other revisions
Last edited August 31, 2020 4:08 am by Andypugh (diff)
Search:
Published under a Creative Commons License