[Home]History of Xylotex With EMC2

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Revision 4 . . February 5, 2005 6:17 pm by Jmkasunich
Revision 3 . . February 5, 2005 6:13 pm by Jmkasunich
  

Difference (from prior major revision) (no other diffs)

Added: 27a28,36

If you want to change the polarity of the direction pins (to reverse an axis), just add a line like this:


setp parport.0.pin-03-out-invert 1


That line inverts pin 3 of the parport, which is X direction for Xylotex. You can invert any pin or pins.


LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Search:
Published under a Creative Commons License