[Home]History of Using A XHC-HB04 Wireless MPG Pendant

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Revision 25 . . January 13, 2018 12:38 am by Jorgie
Revision 24 . . May 14, 2017 2:04 am by Rhulme
Revision 23 . . May 14, 2017 2:04 am by Rhulme
Revision 22 . . May 14, 2017 2:01 am by Rhulme
Revision 21 . . May 6, 2017 1:52 am by Rhulme
Revision 20 . . May 6, 2017 1:50 am by Rhulme
Revision 19 . . (edit) April 13, 2015 4:44 am by MilesWoodcraft
  

Difference (from prior major revision) (no other diffs)

Changed: 5c5,10
The xhc-hb04 driver and a sample config are included in LinuxCNC versions starting with 2.6.0. There is no need to download and compile the driver yourself unless you want to use the XHC-HB04 with an older version of LinuxCNC.

Current Version of LinuxCNC



The xhc-hb04 driver and a sample config are included in LinuxCNC versions starting with 2.6.0. There is no need to download and compile the driver.

Versions of LinuxCNC older than 2.6.0




You will need to download and compile the driver if you want to use the XHC-HB04 with a version of LinuxCNC older than 2.6.0

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Search:
Published under a Creative Commons License