[Home]History of UpdatingTo2.6

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Revision 16 . . August 6, 2014 5:09 am by Jthornton
Revision 15 . . (edit) August 2, 2014 12:41 am by Marcus [Inserted missing "c" character in a sub-heading]
Revision 14 . . July 30, 2014 8:11 am by Seb Kuzminsky [* add link to wheezy install instructions email, say it's preferred over precise]
Revision 13 . . July 30, 2014 8:08 am by Seb Kuzminsky [* fix "fresh install on precise" docs]
Revision 12 . . July 28, 2014 6:51 pm by SebKuzminsky [* i guess it's done now]
Revision 11 . . June 8, 2014 8:11 pm by ip-64-134-196-131.public.wayport.net [More information about the pid change]
Revision 10 . . May 25, 2014 1:18 pm by SebKuzminsky [* halcmd arrows are more strict]
Revision 9 . . May 14, 2014 1:50 pm by Cradek [explain pid change]
Revision 8 . . May 9, 2014 2:57 am by Andypugh
Revision 7 . . April 24, 2014 5:20 am by Andypugh
Revision 6 . . April 16, 2014 7:17 pm by SebKuzminsky
Revision 5 . . April 16, 2014 8:52 am by SebKuzminsky
Revision 4 . . April 16, 2014 8:45 am by SebKuzminsky
Revision 3 . . April 15, 2014 11:31 pm by SebKuzminsky
Revision 2 . . April 13, 2014 10:54 am by Cmorley
Revision 1 . . April 9, 2014 4:46 pm by SebKuzminsky
  

Difference (from prior major revision) (no other diffs)

Added: 34a35,44
A couple of notes:
* Download the iso file and burn it to a DVD.
* To install pick graphical install at the first prompt.
* To enable auto login edit etc/lightdm/lightdm.conf and look for the [SeatDefaults] section snd uncomment autologin name and add your user name and autologin timeout.
** mousepad is similar to gedit so open a terminal and:
** sudo mousepad etc/lightdm/lightdm.conf

If you prefer gedit then you need to update apt-get
* sudo apt-get update
* sudo apt-get install gedit

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Search:
Published under a Creative Commons License