History of UpdatingTo2.5

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

	Revision 14 . . January 28, 2013 10:37 am by Jthornton
	Revision 13 . . (edit) August 17, 2012 8:07 pm by CNCDreamer *[fix an oops]**
	Revision 12 . . (edit) August 17, 2012 8:06 pm by CNCDreamer *[throw in some <nowiki></nowiki> to remove spurious links to wiki homepage]**
	Revision 11 . . April 23, 2012 6:16 pm by Arch Dude [the first heading was confusing.]
	Revision 10 . . April 12, 2012 6:00 am by Jthornton
	Revision 9 . . April 11, 2012 5:55 pm by outpost.timeguy.com
	Revision 8 . . April 1, 2012 11:59 am by Seb Kuzminsky
	Revision 7 . . April 1, 2012 11:01 am by Seb Kuzminsky
	Revision 6 . . March 31, 2012 9:14 am by Seb Kuzminsky
	Revision 5 . . March 30, 2012 5:46 pm by Seb Kuzminsky
	Revision 4 . . (edit) March 30, 2012 4:22 pm by outpost.timeguy.com
	Revision 3 . . March 30, 2012 4:09 pm by outpost.timeguy.com
	Revision 2 . . January 26, 2012 9:13 pm by SebKuzminsky

Difference (from prior major revision) (no other diffs)

Added: 58a59,68

If you are using a usb joypad you may need to rename the pin
input.0.btn-trigger
to
input.0.btn-joystick .

If you are using NGCGUI you will need to edit your configuration file to remove the line
USER_COMMAND_FILE = ./tkapp.py
as the 2.5 version does not use it.

Published under a Creative Commons License