[Home]History of Universal Stepper Controller

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Revision 15 . . May 1, 2017 3:59 pm by Jmelson [update on PCIe fix]
Revision 14 . . (edit) April 12, 2016 2:00 am by Jmelson
  
Difference (from prior major revision) (no other diffs)

Changed: 47,48c47,48
(and others that use the Oxford OXPCIe952 chip, such as Startech and Rosewill) do not work. The Syba PCIe card with the
NetMos 9900 chip works fine.
(and others that use the Oxford OXPCIe952 chip, such as Startech and Rosewill) do not work with older versions of LinuxCNC. Latest versions of LinuxCNC since
March, 2017 have this problem fixed. The Syba PCIe card with the NetMos 9900 or 9901 chip works fine.
LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Search:
Published under a Creative Commons License