[Home]History of USCIniFile

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Revision 4 . . January 9, 2006 9:20 pm by h-69-3-230-106.chcgilgm.covad.net [add comment on OUTPUT_SCALE]
Revision 3 . . June 3, 2005 9:41 pm by h-69-3-230-106.chcgilgm.covad.net [added SETUP_TIME and HOLD_TIME parameters]
  

Difference (from prior major revision) (no other diffs)

Changed: 53c53
OUTPUT_SCALE = 1.0 0.0 This is an output gain setting, the sign reverses the motor direction.

OUTPUT_SCALE = 1.0 0.0 This is an output gain setting, the sign reverses the motor direction. Leave the first parameter at either +1.0 or -1.0, otherwise it divides the possible output range by the value you enter!


LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Search:
Published under a Creative Commons License