[Home]History of TutorAptToAxis

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Revision 8 . . (edit) January 22, 2012 3:41 pm by CNCDreamer [rebranded and tweaked]
Revision 7 . . (edit) March 19, 2008 3:27 pm by adsl-75-4-54-189.dsl.emhril.sbcglobal.net
Revision 5 . . February 11, 2007 1:06 pm by Tomp
  

Difference (from prior major revision) (minor diff, author diff)

Changed: 2,3c2,3

Start with an apt file, end with Emc motion



if you'd like to use my test file ... upload:squareTJP-1.apt

Start with an apt file, end with LinuxCNC motion ==


(if you'd like to use my test file ... upload:squareTJP-1.apt ) ====

Changed: 9c9

I know thats a mouthful but try it & adjust for your locations & example choice



I know that's a mouthful but try it & adjust for your locations & example choice




Changed: 21,25c21,25

Run EMC2 and load the .tap file ( use 'any' in the file selector dialog ) ===


We got a problem in the gcode. The 'post' doesnt follow the emc specs (yet). ===

But it's a tiny error, and we can 'hack' it by interactively asking emc what it wants. ===


This technique only address the 1st error that emc reports. ===

Here, I guessed that emc didnt like the % at the beginning, so I whack it :)



Run LinuxCNC and load the .tap file ( use 'any' in the file selector dialog ) ===


We got a problem in the gcode. The 'post' doesn't follow the LinuxCNC specs (yet). ===

But it's a tiny error, and we can 'hack' it by interactively asking LinuxCNC what it wants. ===


This technique only address the 1st error that LinuxCNC reports. ===

Here, I guessed that LinuxCNC didn't like the % at the beginning, so I whack it :)




Changed: 32c32

The program didnt have a feedrate, so lets add F50. before any coordinated motion.



The program didn't have a feedrate, so lets add F50. before any coordinated motion.




Changed: 42c42




Changed: 48c48




Changed: 52,53c52,55


kudos to the authors of EMC and APT360! upload:tut11-emcrunsaptcode-mehappy.png

kudos to the authors of LinuxCNC and APT360!

upload:tut11-emcrunsaptcode-mehappy.png

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Search:
Published under a Creative Commons License