History of Torch Height Control

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Difference (from prior major revision) (minor diff, author diff)

Changed: 1c1

Info on how to set up a torch heigt controller.

Info on how to set up a torch height controller.

Changed: 9c9,10

The configs can be browsed in the EMC CVS repository:

The configs can be browsed in the EMC git repository: [configs/dallur-thc/]
[configs/plasma-thc/]

Removed: 11,12d11

http://cvs.linuxcnc.org/cvs/emc2/configs/dallur-thc/

http://cvs.linuxcnc.org/cvs/emc2/configs/plasma-thc/

Changed: 14,16c13

There is also a third simulator config, the simulator config has virtual input signals for testing:

http://cvs.linuxcnc.org/cvs/emc2/configs/plasma-thc-sim/

There is also a third simulator config, the simulator config has virtual input signals for testing: [configs/plasma-thc-sim/]

Changed: 19,22c16,20

THC300 http://cvs.linuxcnc.org/cvs/emc2/configs/plasma-thc/thc300.odg

MP1000A http://cvs.linuxcnc.org/cvs/emc2/configs/plasma-thc/mp1000A.odg

MP1000B/C http://cvs.linuxcnc.org/cvs/emc2/configs/plasma-thc/mp1000B.odg

[configs/plasma-thc/thc300.odg]
[configs/plasma-thc/mp1000A.odg]
[configs/plasma-thc/mp10000B.odg]

See also the [configs/plasma-thc/README]

Removed: 24d21

Changed: 33c30

At this time this config is still experimental so please be carefull and feel free to report any issues to Rugludallur on IRC or rugludallur@rugludallur.com.

At this time this config is still experimental so please be careful and feel free to report any issues to Rugludallur on IRC or rugludallur@rugludallur.com.

Changed: 45c42

It is highly recomended to have an inductive or capacative NPN or PNP float switch.

It is highly recommended to have an inductive or capacative NPN or PNP float switch.

Published under a Creative Commons License

	Revision 30 . . (edit) July 2, 2009 3:06 am by Mozmck
	Revision 29 . . June 21, 2009 2:18 pm by JeffEpler
	Revision 28 . . February 25, 2009 11:11 pm by Rugludallur