[Home]History of The Isolcpus Boot Parameter And GRUB2

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Revision 32 . . October 8, 2014 9:54 am by Martyvona
Revision 31 . . October 8, 2014 9:38 am by Martyvona
Revision 30 . . (edit) September 11, 2014 9:28 am by Bari
Revision 29 . . (edit) August 23, 2014 8:42 pm by Bari
Revision 28 . . (edit) August 23, 2014 8:24 pm by NTU [more latency results]
Revision 27 . . August 23, 2014 8:20 pm by NTU [added 64b 3.14 RTAI latency test scores]
Revision 26 . . (edit) August 23, 2014 7:56 pm by NTU [latency test results 3.14 rtai]
Revision 25 . . (edit) August 21, 2014 9:04 pm by Bari
Revision 24 . . (edit) August 15, 2014 12:28 pm by Bari
Revision 23 . . (edit) August 14, 2014 4:44 pm by Bari
Revision 22 . . (edit) August 14, 2014 10:28 am by Bari
Revision 21 . . (edit) August 14, 2014 10:26 am by Bari
Revision 20 . . (edit) August 14, 2014 10:17 am by Bari
Revision 19 . . (edit) August 14, 2014 9:46 am by Bari
Revision 18 . . August 14, 2014 9:35 am by Bari [*added idle=poll test results]
Revision 17 . . (edit) August 14, 2014 6:11 am by Bari
Revision 16 . . (edit) August 14, 2014 5:57 am by Bari
Revision 15 . . (edit) August 13, 2014 5:00 pm by Bari
Revision 14 . . (edit) August 13, 2014 4:59 pm by Bari
Revision 13 . . (edit) August 13, 2014 4:49 pm by Bari
Revision 12 . . (edit) August 13, 2014 4:41 pm by Bari
Revision 11 . . (edit) August 13, 2014 4:40 pm by Bari
Revision 10 . . August 13, 2014 4:31 pm by Bari [*added Latency test results using different isolcpu= settings]
Revision 9 . . (edit) August 13, 2014 6:48 am by Cnc-For-Model-Engineers [change first person to third.]
Revision 8 . . (edit) August 13, 2014 6:38 am by Cnc-For-Model-Engineers [Changed to 3rd person; added 12.04 pae kernel change to 07_rtai]
Revision 7 . . (edit) January 14, 2013 2:05 am by ArcEye
  

Difference (from prior major revision) (author diff)

Added: 2a3,4
See also: FixingSMIIssues, RealTime


Changed: 120c122
3.14 RTAI is in the testing stage at the time of this writing (September 2014). It should be in the official Linuxcnc release in the near future.
3.14 RTAI is in the testing stage at the time of this writing (September 2014). It should be in the official Linuxcnc release in the near future.

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Search:
Published under a Creative Commons License