History of Simple Remote Pendant

	Revision 53 . . (edit) February 22, 2022 5:51 pm by JTrantow *[Add note for 2.9 renames btn-joystick to btn-trigger.]**
	Revision 52 . . (edit) February 27, 2021 4:01 pm by JTrantow [source _postgui fixed.]
	Revision 51 . . (edit) February 27, 2021 12:22 am by JTrantow [Use better jog_speed diagram using correct component names.]
	Revision 50 . . February 27, 2021 12:17 am by JTrantow
	Revision 49 . . February 26, 2021 11:11 pm by JTrantow
	Revision 48 . . February 26, 2021 11:09 pm by JTrantow
	Revision 47 . . (edit) February 25, 2021 1:41 am by JTrantow
	Revision 46 . . (edit) February 22, 2021 10:20 pm by JTrantow
	Revision 45 . . February 22, 2021 10:18 pm by JTrantow
	Revision 44 . . (edit) February 22, 2021 10:14 pm by JTrantow
	Revision 43 . . February 22, 2021 10:11 pm by JTrantow
	Revision 42 . . February 22, 2021 9:36 pm by JTrantow
	Revision 41 . . (edit) February 9, 2021 10:25 pm by JTrantow [Minor change to clarify step 3.]
	Revision 30 . . March 1, 2013 2:55 pm by Jthornton

Difference (from prior major revision) (minor diff, author diff)

Added: 14a15,16

NOTE: LinuxCNC 2.9 renames btn-joystick to btn_trigger.

Changed: 36c38

* joystick - "1" or "X".

* joystick - "1" or "X". Renamed trigger in LinuxCNC 2.9.

Changed: 64c66

source joypad_xyz_postgui.hal

source joypad_xyz.hal

Changed: 69c71

source joypad_xz_postgui.hal

source joypad_xz.hal

Changed: 76c78

(Special Thanks to John Gee for double-checking my changes.)

Changed: 92c94

Added: 118a121,124

2.9 and later

net slow <= joy_or2_sel0.in0 => input.0.btn-trigger # Button for selecting first jog speed.

Published under a Creative Commons License