History of MeetingMinutes-2026-01-04

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Difference (from prior major revision) (no other diffs)

Removed: 1d0

# LinuxCNC dev meeting 2026-01-04

Changed: 7,11c6,10

* forum post: [1](https://forum.linuxcnc.org/38-general-linuxcnc-questions/33459-linuxcnc-s-curve-accelerations?start=510)
* PR: [2](https://github.com/LinuxCNC/linuxcnc/pull/3683)
* do the soft limits work if you are homed and low jerk?
* don't put comments after a number (one of the ini parsers blows up)
* https://www.doc88.com/p-9119146814737.html

** forum post: [1](https://forum.linuxcnc.org/38-general-linuxcnc-questions/33459-linuxcnc-s-curve-accelerations?start=510)
** PR: [2](https://github.com/LinuxCNC/linuxcnc/pull/3683)
** do the soft limits work if you are homed and low jerk?
** don't put comments after a number (one of the ini parsers blows up)
** https://www.doc88.com/p-9119146814737.html

Changed: 14,15c13,14

* addon to linuxcnc
* setup wizard (?) with predefined motors / interfaces / …

** addon to linuxcnc
** setup wizard (?) with predefined motors / interfaces / …

Changed: 27c26

* vital systems will get back into linuxcnc with ethercat motenc card

** vital systems will get back into linuxcnc with ethercat motenc card

Changed: 35,38c34,37

* more separation between components? more packages?
* more work for andy
* maybe add separate script to install runtime deps
* assigned to steffen

** more separation between components? more packages?
** more work for andy
** maybe add separate script to install runtime deps
** assigned to steffen

Changed: 46,50c45,49

* FreeCAD? interface: ?
* tooltable db conversion
* smoothcore
* ISO13399
* mtconnect

** FreeCAD? interface: ?
** tooltable db conversion
** smoothcore
** ISO13399
** mtconnect

Changed: 98c97

https://github.com/LinuxCNC/linuxcnc/issues/3684

Published under a Creative Commons License

	Revision 3 . . January 4, 2026 2:49 pm by Rmu
	Revision 2 . . January 4, 2026 2:44 pm by Rmu
	Revision 1 . . January 4, 2026 2:40 pm by Rmu