History of LinuxCNC Development

Difference (from prior major revision) (no other diffs)

Changed: 1c1

THIS PAGE IS BEING EDITED TO REFLECT THE AGREEMENT TO REBRAND EMC2 TO LINUXCNC

This page was edited to reflect the agreement to rebrand (the earlier name) to LinuxCNC. (Remove this line after awhile.)

Changed: 7,8c7,8

* Some AdditionalGCodeFunctionality , might be done as a different interpreter for EMC2
* Adding a configuration program based on EmcConfig

* Some AdditionalGCodeFunctionality , might be done as a different interpreter for LinuxCNC
* Adding a configuration program based on (done?)

Changed: 14c14

* customizable, EMC2 specific text highlighting in gedit

* customizable, LinuxCNC specific text highlighting in gedit

Changed: 16c16

* Introspection - the ability for g-code to access EMC2's state (in #variables)

* Introspection - the ability for g-code to access LinuxCNC's state (in #variables)

Changed: 22c22

* PythonBindings provide a python shell to access emc's canonical interface and rs274 interp

* PythonBindings provide a python shell to access LinuxCNC's canonical interface and rs274 interp

Changed: 42,43c42

* http://www.linuxcnc.org/EMC2_Code_Notes.pdf is a little dated, but still has some good info. <- dead
* http://www.linuxcnc.org/docs/EMC2_Developer_Manual.pdf explains coding conventions and a general overview of emc's internals

* http://www.linuxcnc.org/docs/LinuxCNC_Developer_Manual.pdf explains coding conventions and a general overview of LinuxCNC's internals

Changed: 45c44

* EMC2 Documentation

* [LinuxCNC Documentation]?

Changed: 58,59c57

(short list with links to people working on emc; changeset count is from
5/29/2009)

(short list with links to people working on LinuxCNC; changeset count is from 5/29/2009)

Published under a Creative Commons License

	Revision 2 . . November 30, 2016 12:53 am by KimK [Renaming fixed, lots of old stuff there though. ]
	Revision 1 . . January 19, 2012 4:37 pm by CNCDreamer [copied "Emc2 Development" to "LinuxCNC Development"]