[Home]History of Hobbing

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Revision 5 . . April 3, 2025 5:05 am by Andypugh
Revision 4 . . August 1, 2015 1:33 pm by Andyough
  

Difference (from prior major revision) (no other diffs)

Changed: 4c4,6
http://www.youtube.com/user/blyndpew#p/a/f/0/ZhICrb0Tbn4
https://youtu.be/ZhICrb0Tbn4?si=Dl4K2JV4SXZi_UoL
And later developed:
https://youtu.be/xdE46yvckbM?si=kNpARCeeRW_zoHRu

Changed: 6c8,9
The hardware aspects are fairly clearly shown in the video, the only other things needed are a Pyvcp panel with a spinbox in it for tooth count (which should be wired to the invert.0.in pin in the posgui.hal file, and these some extra lines in the main HAL file:

The hardware aspects are fairly clearly shown in the first video, the only other things needed are a Pyvcp panel with a spinbox in it for tooth count (which should be wired to the invert.0.in pin in the posgui.hal file, and these some extra lines in the main HAL file:

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Search:
Published under a Creative Commons License