[Home]History of Gremlin

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Revision 10 . . March 14, 2013 6:49 pm by Kirk Wallace [Added hershey.py note]
Revision 9 . . February 5, 2013 6:44 pm by Kirk Wallace [Added limit box fix text and image]
Revision 8 . . (edit) February 5, 2013 12:06 am by Kirk Wallace [Minor edit of soft limit text]
Revision 7 . . February 4, 2013 11:55 pm by Kirk Wallace [Added soft limit with tool offset problem]
Revision 6 . . January 31, 2013 2:09 am by Kirk Wallace [Added code for G5x fix]
Revision 5 . . (edit) January 25, 2013 5:34 pm by Kirk Wallace [Improved table layout]
Revision 4 . . January 25, 2013 12:31 am by Kirk Wallace [Added grid and limit fix code, removed bad tool tip code]
Revision 3 . . January 24, 2013 12:47 am by Kirk Wallace [Added tool orientation fix code listing]
Revision 2 . . January 23, 2013 11:11 pm by Kirk Wallace [Added study of tool tip orientation 9]
Revision 1 . . January 23, 2013 6:53 pm by Kirk Wallace [Start of Gremlin page]
  

Difference (from prior major revision) (no other diffs)

Added: 6a7,10

hershey.py?



<html><img style="float:right" src="http://wiki.linuxcnc.org/uploads/hershey_font.png"></html>
It took me a while to find out why hershey.py has the hershey name. The answer may be here: http://en.wikipedia.org/wiki/Hershey_font and http://www.ghostscript.com/doc/current/Hershey.htm . hershey.py has on-board the font data for digits 0-9, -, ., and upper-case letters G, X, Y, Z, U, V, W for labeling axes and the reference frame (for example G54).</td>


LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Search:
Published under a Creative Commons License