History of GantryPlasmaMachine

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Difference (from prior major revision) (no other diffs)

Changed: 8c8

This page documents an example of a working servo motor based gantry plasma machine with a torch height controller (THC). Linuxcnc version 2.5.0pre2 is used as control software and Gladevcp is used for the THC controls and other user interface buttons in Axis. All configuration files are included in this document, and are the actual, working files. The goal is to share information and lessons learned in the hope that it will save other users time and tribulation.

This page documents an example of a working servo motor based gantry plasma machine with a torch height controller (THC). LinuxCNC version 2.5.0pre2 is used as control software and Gladevcp is used for the THC controls and other user interface buttons in Axis. All configuration files are included in this document, and are the actual, working files. The goal is to share information and lessons learned in the hope that it will save other users time and tribulation.

Changed: 488c488

Updated wiring diagram files to include changes made to ESTOP circuit. (date:062612)

Published under a Creative Commons License

	Revision 248 . . October 27, 2017 12:46 am by KimK [Add nowiki tags to LinuxCNC mentions.]
	Revision 247 . . (edit) May 10, 2015 3:56 am by Tome [Updated youtube link]