[Home]History of EpoCAT FR1000

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Revision 3 . . (edit) June 4, 2014 6:47 am by A.Bausano
Revision 2 . . June 4, 2014 6:40 am by A.Bausano
Revision 1 . . June 4, 2014 6:15 am by A.Bausano
  

Difference (from prior major revision) (minor diff)

Changed: 1c1
EpoCAT? FR1000 is a control board for axes in frequency/burst.
EpoCAT FR1000 is a control board for axes in frequency/burst.

Changed: 3c3
The board is compatible with EtherCAT protocol. With a maximum output frequency up to 1MHz, it is ideal for applications with step motors, and applications with burst piloted brushless motors. The board manages up to 5 axes in frequency, 4 inputs, 2 outputs, 1 DAC of 12 bit and 2 ADC of 12 bit. The board is supplied with all connectors and can be installed on DIN guide. Since it is a compatible slave EtherCAT board, it is possible to use it with any EtherCAT Master board of AxesBrain? or LinuxCNC type or other.
The board is compatible with EtherCAT protocol. With a maximum output frequency up to 1MHz, it is ideal for applications with step motors, and applications with burst piloted brushless motors. The board manages up to 5 axes in frequency, 4 inputs, 2 outputs, 1 DAC of 12 bit and 2 ADC of 12 bit. The board is supplied with all connectors and can be installed on DIN guide.

Added: 24a25,28

Here is a photo of the board:

http://www.bausano.net/images/EpoCAT_Piccola.png

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Search:
Published under a Creative Commons License