[Home]History of EMC Fest 2006

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Revision 12 . . (edit) May 4, 2006 9:51 am by Rayhenry
Revision 11 . . April 7, 2006 7:27 pm by SWPadnos [Addded workshop dates]
Revision 10 . . April 3, 2006 7:12 pm by JeffEpler
  
Difference (from prior major revision) (minor diff, author diff)

Changed: 7c7
EMC's major get together this year is during the cnc-workshop (www.cnc-workshop.com) put on by Roland Friestad and the Cardinal Engineering crew. Both developer and integrator sessions will run throughout the weeklong event.
EMC's major get together this year is during the cnc-workshop (www.cnc-workshop.com) put on by Roland Friestad and the Cardinal Engineering crew. Both developer and integrator sessions will run throughout the weeklong event. CNC Workshop runs from May 15 (Monday) through May 21 (Sunday).

Changed: 22,23c22,23
   Monday --     Introduction to EMC2

   Tuesday --    Using the Hardware Abstraction Layer part 1

   Monday, May 15 --     Introduction to EMC2

   Tuesday, May 16 --    Using the Hardware Abstraction Layer part 1


Changed: 25,27c25,27
   Wednesday --  Using the Hardware Abstraction Layer part 2

   Thursday --   Ladder logic programming part 1

   Friday --     Ladder logic programming part 2

   Wednesday, May 17 --  Using the Hardware Abstraction Layer part 2

   Thursday, May 18 --   Ladder logic programming part 1

   Friday, May 19 --     Ladder logic programming part 2


Removed: 130,132d129
*Sherline stepper Lathe
**100 cpr spindle encoder
**PMDX150/130 drive package
LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Search:
Published under a Creative Commons License