[Home]History of A New Approach For Using Joypads With LinuxCNC

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Revision 16 . . January 2, 2017 10:07 pm by KimK [Update project name]
Revision 15 . . (edit) January 21, 2012 12:53 pm by CNCDreamer [fixed LinuxCNC nowiki issue]
  

Difference (from prior major revision) (no other diffs)

Changed: 37c37
The -W option is important, as it forces LinuxCNC to wait until this userspace component is fully loaded (hal_ready()). Otherwise it would't find the pins later used in the hal-file, because they are not exported by hal_input at that time.
The -W option is important, as it forces LinuxCNC to wait until this userspace component is fully loaded (hal_ready()). Otherwise it would't find the pins later used in the hal-file, because they are not exported by hal_input at that time.

Changed: 57c57
this requires that you have previously installed the build-essential and emc2-dev packages (see ContributedComponents for more information)
this requires that you have previously installed the build-essential and linuxcnc-dev packages (see ContributedComponents for more information)

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Search:
Published under a Creative Commons License