THIS PAGE IS BEING EDITED TO REFLECT THE AGREEMENT TO REBRAND EMC2 AS LINUXCNC
Using EMC2
Start EMC2 by choosing Applications > CNC > EMC2 from the menu, or by typing "emc" at a command prompt.
You immediately see the configuration wizard which shows a list of available sample configurations. By clicking on each you can read about it. When you are ready, you can run an existing configuration or you can copy an existing configuration directory into your own directory (~/emc2/configs/) to further customize it. Next, you may wish to read up on
Configuring EMC2..
Documentation
Safety