MeetingMinutes-2026-01-04

Linuxcnc dev meeting 2026-01-04

andy, hansu, nico, rene, rich, robert

trajectory planner: have detailed look at how it worksforum post: https://forum.linuxcnc.org/38-general-linuxcnc-questions/33459-linuxcnc-s-curve-accelerations?start=510

PR: https://github.com/LinuxCNC/linuxcnc/pull/3683

do the soft limits work if you are homed and low jerk?

don't put comments after a number (one of the ini parsers blows up)

https://www.doc88.com/p-9119146814737.html

status FreeCAD? cooperation

Rich Colvin / rosette lathe / Rose Engine Butler https://roseenginebutler.comaddon to linuxcnc

setup wizard (?) with predefined motors / interfaces / …

who is building the docs? buildbot? buildbot2?

Trixie 2.9.8 ISO status

Issues

1. 3675 - rene

1. 3645 - robert PR

1. 3644 - andy is working on pin conversions

hal_gpio in

1. 3627 - robert PR

1. 3286 in progressvital systems will get back into linuxcnc with ethercat motenc card

1. 2734: do it (?)

1. 2331: nearly finished

1. 2116: petter, nico volunteers to proof-read

1. 1694:

1. 1529: closed

1. 3658: probably done

 #3391: ping berthomore separation between components? more packages?

more work for andy

maybe add separate script to install runtime deps

assigned to steffen

1. 3380: closed

1. 3238

1. 3185: closed

1. 3171: andy

1. 3057: hansu

1. 3032: hansu, almost done (man1, man3)

1. 2994: reneFreeCAD? interface: ?

tooltable db conversion

smoothcore

ISO13399

mtconnect

1. 2949

1. 2884: depends on noparam

1. 3684

get rid of superfluous ini parsers if possible?

chat log:

René 20:05 yes, I can hear you

Steffen Möller 20:12 @Andy, we cannot hear you, I am afraid.

Nico 20:19 afk

andypugh 20:59 https://openuk.uk/honours/

Rich Colvin 21:33 Apologies gentlemen, but my cold is getting the best of me and I must drop off.

René 22:36 https://github.com/LinuxCNC/linuxcnc/commit/b03e9d92731ad2c72a4b206e56fe57da73fca4d2#diff-f312cf11426f38ce14f58116be820e007813335ec2fc89eab9bcc7a6913808a9R2432

Robert Schöftner 22:40 https://de.scribd.com/document/599640593/ISO-13399-1-2006-amd1-2010

andypugh 22:40 https://github.com/mtconnect

Steffen Möller 22:41 https://www.mmc-carbide.com/en_jp/technical_information/iso/iso13399

Steffen Möller 22:49 https://github.com/LinuxCNC/linuxcnc/issues/3684