MeetingMinutes-2025-11-23

Informal Meeting Minutes of the dev video meeting 2025-11-23

LinuxCNC Videoconf Agenda

Review of open issues:

• 3641 + PR 3642:  - MDI ok to merge -> merged

• 2331: Andy is reviewing drivers for 32->64 bit width wrt wrapping counters

  Waiting for a survey on what ancient hardware is still used.

• Robert agrees to write up how arrange LinuxCNC to drop core dumps and learned how to edit the Wiki

• Steffen agreed to try a new AMD/Intel? installer for LinuxCNC

• "NoParamsBranch?" - will see another iteration by René

  http://www.linuxcnc.org/iso/linuxcnc_2.9.7-amd64.hybrid.iso

• 3627: Will be looked at - Andy did not yet have the time, Rob volunteered, likely needs some larger solution to cover state tags

• Next meeting in two weeks

• 3524: Tormach 9 axis planner -> Robert will adress this

• Going through some older issues - 138 should be closed

• Went through various older bug reports

• Steffen offered to prepare a PR to address https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1108616 

• Robert kindly offered to have a look at building the Ukrainian documentation

• Chatlog **

[19:59] Welcome to LinuxCNC Meeting!For help on using BigBlueButton? see these (short) tutorial videos.To join the audio bridge click the phone button. Use a headset to avoid causing background noise for others.Um per Telefon teilzunehmen, wählen Sie *redacted*. Geben Sie danach diese PIN ein: *redacted* und bestätigen Sie mit der # Drücken Sie die Taste 0 Taste Ihres Telefons, um sich stumm bzw. freizuschalten.

[20:06] andypugh: Can you hear me this time?

[20:08] René: no

[20:17] Steffen Möller: Attempt of protocol emerging on https://yopad.eu/p/LinuxCNCVideoConf

[20:47] sliptonic: I need to drop out.

I'd like to help if I can but it's pretty hard to know what the goals/status are.

There seems to be some important information in the emc devel mailing list that isn't getting into github. The github info is a bit messy as well. I can't tell which of the 326 issues are important to a release and which ones are 'nice to have'.

Same thing with the PRs. It's not clear which ones are holding up a release and which ones are WIP.

If anyone wants help getting Github in shape, ping me this week and I might be able to help.

[20:47] andypugh: New Trixie / 2.9.7 ISO image: http://www.linuxcnc.org/iso/linuxcnc_2.9.7-amd64.hybrid.iso

[21:15] Robert Schöftner: https://github.com/rene-dev/linuxcnc/tree/noparam

[21:23] Steffen Möller: https://linuxcnc.org/docs/devel/html/gui/gmoccapy.html

[21:31] andypugh: http://buildbot2.highlab.com/buildbot/#/builders/8/builds/2825

[21:40] Robert Schöftner: git worktree

[22:20] Steffen Möller: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1108616

[22:25] Steffen Möller: https://www.youtube.com/watch?v=DdvIoMk-GNE

[22:34] Steffen Möller: https://qa.debian.org/popcon.php?package=linuxcnc