[Home]LinuxCNC Fest 2014

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Difference (from prior major revision) (no other diffs)

Added: 51a52
* Gantry homing test jig with servos/encoders with index/home switches - Chris Radek

Added: 55a57
* Power supply, 24ish volts at a few amps - Chris Radek

Contents

1. Intro
2. Planning to attend
3. Planning to bring
4. Hope someone else brings
5. Things we hope to discuss or work on
6. Workshops, Presentations, Classes
7. LinuxCNC Fest Cam
8. IRC

1. Intro

The LinuxCNC Fest for 2014 will be held in at Tx/Rx Labs in Houston, TX. The official website for Tx/Rx is [here].

The workshop official days are Saturday October 18 through Friday October 24, 2014, but some may be planning to arrive earlier or stay later, so check all your options.

Google directions to some of the places mentioned on the official page are available:

[Tx/Rx Labs]

2. Planning to attend

Chris Kelley - Tx/Rx - hosting

Roland V. - Tx/Rx president - hosting

Mark S. - Tx/Rx

Jeremy G. - Tx/Rx

Mike G. - Tx/Rx

Jeff Epler -

Sebastian K. -

Mark Johnsen -

Moses McKnight? -

Chris Radek

Jon Elson

John Kasunich

 add your name here, see instructions and link at bottom of page under BasicSteps or email: lcncfest2014 -at- txrxlabs.org .

3. Planning to bring

Yakasawa Motoman Robot Arm - Roland von Kurnatowski 1 5i25 + 7I77 - Roland von Kurnatowski 1 5I25 + 7I76 - Roland von Kurnatowski 1 100W yag fiber coupled laser - Roland von Kurnatowski 1 Flow 45k PSI abrasive waterjet w/ allen bradley controls - Roland von Kurnatowski

4. Hope someone else brings

5. Things we hope to discuss or work on

6. Workshops, Presentations, Classes

7. LinuxCNC Fest Cam

8. IRC


LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
This page is read-only. Follow the BasicSteps to edit pages. | View other revisions
Last edited October 16, 2014 9:14 am by outpost.timeguy.com (diff)
Search:
Published under a Creative Commons License