[Home]LawrenceG

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Difference (from prior major revision) (minor diff, author diff)

Changed: 9,12c9,10
I am currently running emc1 under Redhat 8 on a shoptask mill/drill/lathe.
I am also running BDI 4.20 with mods for quadrature phase drive under the Ubuntu distribution on the
same machine ( 2 laptops ). If you need quadrature or 4 wire raw phase drive under BDI 4.20, you
will need to build from CVS until the next BDI release.
I am currently running emc2 under Ubuntu Dapper on a shoptask mill/drill/lathe.
I use quadrature phase drive (step type 2).

Changed: 16c14
I try to monitor the irc channel when I am thinking about it.
I try to monitor the irc channel (user LawrenceG) when I am thinking about it.

Lawrence Glaister
Ham Radio Callsign: VE7IT
Sourceforge Developer ID: gspy
Location: Nanoose Bay, BC, Canada about a 60 mile swim from Vancouver!

I am currently running emc2 under Ubuntu Dapper on a shoptask mill/drill/lathe. I use quadrature phase drive (step type 2).


You may reach me at ve7it AT shaw.ca

I try to monitor the irc channel (user LawrenceG) when I am thinking about it.

 (irc.freenode.net  and /join #emc)
I have a couple of project web pages with cnc/radio/pic/test equipment projects:
http://members.shaw.ca/cncstuff/home.html and http://members.shaw.ca/swstuff/index.htm

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
This page is read-only. Follow the BasicSteps to edit pages. | View other revisions
Last edited September 12, 2006 7:33 pm by S010600045ae2c372.pk.shawcable.net (diff)
Search:
Published under a Creative Commons License