[Home]Acemi

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Difference (from prior major revision) (no other diffs)

Changed: 32,35c32,35
:[Scara video 1]
:[Scara video 2]
:[Scara video 3]
:[Scara video 4]
:[Scara video 1]
:[Scara video 2]
:[Scara video 3]
:[Scara video 4]

Changed: 38,39c38
:[Wire forming machine video 1]
:[Wire forming machine video 2]
:[Wire forming machine video]

Changed: 42,43c41,42
:[Button machine video 1]
:[Button machine video 2]
:[Button machine video 1]
:[Button machine video 2]

Changed: 46c45
:[Parallel arms video 1]
:[Parallel arms video 1]

I'm living in Istanbul. I'm interested in FOSS, programming and CNC machines.
My home page is http://www.emrah.com but the content is mostly for my use
and it's a bit enigmatic for the others.

I'm currently running LinuxCNC 2.3.3 on Debian Lenny with the RTAI patched Linux 2.6.30.5 kernel for my new machines.

Debian Lenny Compile LinuxCNC

Debian Lenny Compile RTAI

Debian Etch Compile RTAI

[[Debian Etch Server And Diskless LinuxCNC Thin Clients]]

Debian Etch Compile LinuxCNC

Debian Etch Compile RTAI

Debian Sarge Compile LinuxCNC



Some videos of my machines which are controlled by LinuxCNC:

[Scara video 1]
[Scara video 2]
[Scara video 3]
[Scara video 4]

[Wire forming machine video]

[Button machine video 1]
[Button machine video 2]

[Parallel arms video 1]

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
This page is read-only. Follow the BasicSteps to edit pages. | View other revisions
Last edited February 7, 2022 5:58 pm by Acemi (diff)
Search:
Published under a Creative Commons License