[Home]GWiz - A Gcode Wizard Framework

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

GWiz is a Gcode Wizard Framework that can allows someone who is not a computer programmer to generate wizards with graphic interfaces to gcode subroutines.

GWiz is presently in alpha test and has no significant documentation.

If you would like to be an alpha test site, go to: http://www.se-ltd.com/~lerman/files/GWIZ/ and download the two .deb files.

 gwiz_0.1.1_i386.deb         is the gwiz program
 demowiz_0.1.1_i386.deb  is some demo wizards

Install them both in that order...

 sudo dpkg -i gwiz_0.1.1_i386.deb
 sudo dpkg -i demowiz_0.1.1_i386.deb

In your .ini file add in section [FILTER]

 PROGRAM_EXTENSION = .wiz GWiz Wizard File
 wiz = wiz2gcode

You MUST start emc using the axis gui at least once prior to starting GWiz. That will cause the .ini file to be selected. GWiz uses the file name stored in ~/.emcrc as its init file. To start GWiz, select it from the Applications/CNC menu.

The ONLY wizard that is really there is the bolt hole circle wizard. In the code, you must set the feed before you drill the holes. So, you need a line like: #<_feed_rate> = 6. In the future, the speed and feed wizard can set that.

I suggest that you start by creating a file that looks like:

#<_feed_rate> = 6
o<boltholes> CALL (Drill Holes On A Circle)[0.0].... -- created by wizard

Save it as test (GWiz will append .wiz to the file name).

Then start axis and select the file test.wiz.

Please try to keep a log of the problems you have.


Ken lerman (on IRC) lerman-emc at se dash ltd dot com

==== Please feel free to add notes and comments below this line ====

Enhancement Requests:

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
This page is read-only. Follow the BasicSteps to edit pages. | View other revisions
Last edited October 31, 2009 5:16 pm by Ftkalcevic (diff)
Published under a Creative Commons License