History of Editing MESA Bitfiles Spartan2

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Difference (from prior major revision) (no other diffs)

Changed: 1c1

Linuxcnc Bitfiles for MESA HostMot2 Spartan2 boards

LinuxCNC Bitfiles for Mesa HostMot2 Spartan2 boards

Added: 2a3

If you have a 5I20 or 4I65 you are in the right place, otherwise, follow the directions for the other newer mesa cards.

Changed: 4,6c5

If you have a 5I20 or 4I65 you are in the right place otherwise follow the directions for the other newer mesa cards.

This is a step by step guide showing how to install xilinx and make bitfiles for your Spartan2 (5I20, 4I65) [MESA] boards running running [HOSTMOT2] in [LINUXCNC] or at least what I encountered along the way.

This is a step by step guide showing how to install xilinx and make bitfiles for your Spartan2 (5I20, 4I65) [Mesa] boards running running [HostMot2] in [LinuxCNC] or at least what I encountered along the way.

Published under a Creative Commons License

	Revision 2 . . October 26, 2017 11:15 pm by KimK [Add nowiki tags as needed. Minor edits. ]
	Revision 1 . . December 8, 2014 4:21 am by Tlightus