[Home]History of MillSetup

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org

Revision 7 . . (edit) February 15, 2012 3:31 pm by BRSS [URL correction]
Revision 6 . . February 7, 2009 7:06 am by Kestreltom
Revision 5 . . February 6, 2009 4:14 am by SebastianKuzminsky [tried to clarify coordinate systems & their offsets; added links to further info]
  

Difference (from prior major revision) (minor diff, author diff)

Added: 241a242,248
The command for moving to a tool change position is implied in the "M6" command - but -
the machine will not make a move unless this position is specified in the [EMCIO] section of the INI file
with a statement that follows the format: TOOL_CHANGE_POSITION = 0 0 2 (In this example 0 0 2 refers to X Y Z absolute machine coordinates)
This is specified in more detail here:

http://www.linuxcnc.org/docs/html/config_ini_config.html#sub:%5BEMCIO%5D-Section


LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Search:
Published under a Creative Commons License