History of Xylotex With EMC2
LinuxCNCKnowledgeBase
|
RecentChanges
|
PageIndex
|
Preferences
|
LinuxCNC.org
Revision 4
. . February 6, 2005 2:17 am by
Jmkasunich
Revision 3
. . February 6, 2005 2:13 am by
Jmkasunich
Difference (from prior major revision)
(no other diffs)
Added: 27a28,36
If you want to change the polarity of the direction pins (to reverse an axis), just add a line like this:
setp parport.0.pin-03-out-invert 1
That line inverts pin 3 of the parport, which is X direction for Xylotex. You can invert any pin or pins.