[Home]History of Hooking Up A MPG Pendant

LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Revision 16 . . August 11, 2011 2:32 pm by Jthornton
Revision 15 . . (edit) September 29, 2010 4:11 pm by Ckingsbury [* missing setp in axis.N.jog-vel-mode]
  
Difference (from prior major revision) (no other diffs)

Changed: 40c40
In your custom.hal file or other .hal file add the following making sure you don't have mux4 or an encoder already in use. If you do just increase the counts and change the reference number.
In your custom.hal file or other .hal file add the following making sure you don't have mux4 or an encoder already in use. If you do just increase the counts and change the encoder and or mux4 reference number as needed. Delete the addf lines for any components you already have in your main hal file.
LinuxCNCKnowledgeBase | RecentChanges | PageIndex | Preferences | LinuxCNC.org
Search:
Published under a Creative Commons License