LinuxCNC Fest 2014

Contents

1. Intro

2. Planning to attend

3. Planning to bring

4. Hope someone else brings

5. Things we hope to discuss or work on

6. Workshops, Presentations, Classes

7. LinuxCNC Fest Cam

8. IRC

1. Intro

The LinuxCNC Fest for 2014 will be held in at Tx/Rx Labs in Houston, TX. The official website for Tx/Rx is [here].

The workshop official days are Saturday October 18 through Friday October 24, 2014, but some may be planning to arrive earlier or stay later, so check all your options.

Google directions to some of the places mentioned on the official page are available:

[Tx/Rx Labs]

2. Planning to attend

Chris Kelley - Tx/Rx - hosting

Roland V. - Tx/Rx president - hosting

Mark S. - Tx/Rx

Jeremy G. - Tx/Rx

Jeff Epler -

Sebastian K. -

 add your name here, see instructions and link at bottom of page under BasicSteps or email: lcncfest2014 -at- txrxlabs.org .

3. Planning to bring

• Move this example line down and add what you're bringing and your --name

4. Hope someone else brings

• Add what you'd like to have someone else bring and your --name

5. Things we hope to discuss or work on

• The on conversion of the Burgmaster Powerhawk with ATC (formerly a Fanuc 6M control) should be nearing completion -- Chris Kelley
• An 88 ton CNC press brake is next for conversion -- Chris Kelley
• Add what projects you'd like to work on and your --name

6. Workshops, Presentations, Classes

• his success with writing code for and building a custom usb breakout board for LinuxCNC -- Mark S.
• his home built LinuxCNC laser cutter with hal components -- Jeremy G.
• Add what presentations you'd like to make and your --name

7. LinuxCNC Fest Cam

• If the Webcam gets set up this year, a link should be here.

8. IRC

• IRC Freenode #linuxcnc will be there as always.